Shape morphing in aerospace structures has the potential to reduce noise, improve efficiency, and increase the adaptability of aircraft. Among the many challenges in developing morphing technologies is finding suitable wing skin materials that can be both stiff to support the structural loads, while being elastic and compliant to support this shape morphing an minimize actuation energy. This remains an open challenge, but many possible solutions have been found in smart materials, namely shape memory alloys and polymers. Of these, shape memory polymers have received more attention for wing skins due to their low density and cost, and high elastic limits in excess of 100% strain, but they suffer from generally low overall moduli. Shape memory polymer composites have been considered to address this, typically in the form of particulate/nanoscale reinforcements or by using them as matrix materials in laminate composites. While these can serve to increase the stiffness of the composite, there is still a present need for reinforcement strategies that can also maintain the large changes in stiffness of shape memory polymers. An alternative shape memory composite relies on honeycomb materials with shape memory polymer infills. Previous research has shown that polymer filled honeycombs exhibit greater in-plane moduli greater than the infill or honeycomb alone, but there has been little research focused on understanding this behavior. Moreover, while most engineered cellular structures are comprised of symmetric and periodic cells, cellular structures in nature are commonly spatially varying, asymmetric networks, which have not been considered in these composites.
Motivated by these challenges in designing materials for shape morphing, this work seeks to explore the use of shape memory polymer-filled honeycomb composites for use as variable stiffness materials. First, the interaction between infill and the honeycomb, and the relationship between the honeycomb geometry and the effective composite properties is not well understood. This research first investigates the mechanisms of stiffening in these composites through both unit cell finite element models and through experimental characterization. Parametric studies are completed for selected honeycomb geometry design variables, and three key mechanisms of stiffening are identified. Next, these mechanisms are further supported by experimental studies, and comparisons are made showing the limitations of the few existing analytic models.
With the knowledge gained from these studies, shape memory polymer infills are considered to create variable stiffness composites. In the first study, sizing design variables are selected to parametric the honeycomb cell geometry, with the designs constrained to be symmetric in-plane. A constrained multiobjective design optimization is completed for two chosen performance objectives, and corresponding local sensitivity studies are completed as well. The results predict that these composites meet and exceed the current bounds of both shape memory polymers and their composites, but also variable stiffness materials in general. A great degree of tailorability is demonstrated, and the model predictions are validated against experimental results from fabricated honeycomb composite samples.
Next, generally asymmetric cell geometries are considered by defining shape design variables for the cell geometry. These cells are constrained to be periodic but not symmetric, allowing for the possible benefits of asymmetric to be investigated. Additionally, interconnected and spatially varying multicell unit cells are considered, further allowing for the study of spatially varying cell geometries. Multiobjective optimizations are completed for two unit cell cases, and Pareto fronts are identified. The results are compared to both those from the sizing optimization study and to the current state of the art, and are similarly found to demonstrate high performance and a great degree of tailorability in effective properties. / Doctor of Philosophy / Vehicle shape morphing, the smooth, continuous change of an aircraft's external shape, can greatly improve the efficiency and reduce noise in modern and future vehicles. Among the is challenges in this field is finding suitable skin materials that can be both stiff to support the forces exerted on an aircraft, while being soft and compliant to support this shape morphing. Smart materials, namely shape memory polymers, present many attractive options for this need, but generally need to have a higher stiffness to be suitable for large scale applications. To address this, adding reinforcements to shape memory polymers has been of interest, and current work has largely been focused on using long fiber composites or particulate and nano-reinforcements. As an alternative to these strategies, inspiration can be found in nature where polygon cells are a common means of reinforcement in both plants and animals. Motivated by the current state of the art and the promise of shape morphing structures, this work seeks to investigate cellular structures in the form of hexagonal honeycombs as a means of increasing the stiffness of shape memory polymer infills. This is done by first improving the understanding of more general polymer-filled honeycomb, which exhibit effective stiffnesses greater than the honeycomb or polymer alone. With a working understanding of how the honeycomb stiffens the infill and how the cell geometry influences this behavior, variable modulus infills are next considered.
First, sizing design variables (i.e. the lengths and thicknesses of the honeycomb geometry) are selected to describe cell geometries. Design optimization problems are considered and used to estimate the bounds of possible performance for these composites. Relationships between the design variables and the composite performance are investigated, and an improved understanding of these composites is developed. Next, shape design variables are selected to allow for the asymmetry and spatial variation found in natural cellular structures, and similar design optimizations are completed. The results of this work are experimentally validated, and demonstrate that these composites allow for combinations of stiffness and stiffness change that meet and exceed the current state of the art. Furthermore, tailoring the cell geometry allows for an easy means of changing the behavior of the composite. This work represents a great improvement and an important step in overcoming the challenges in developing shape morphing systems.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/114492 |
Date | 12 April 2023 |
Creators | Squibb, Carson Owen |
Contributors | Aerospace and Ocean Engineering, Philen, Michael Keith, Seidel, Gary D., Kapania, Rakesh K., Lowe, Kevin T., Canfield, Robert Arthur |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Dissertation |
Format | ETD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0019 seconds