Producing axi-symmetrical parts with holes from tubular stock by tube upsetting is a frequently used technique in industry. There are basically four types of tube upsetting process / external, internal, simultaneous internal and external upsetting, and expanding of tube. In general, tubular parts require more than one upsetting stage. In industry, generally trial-error methods, which require lots of time and effort depending on experience, are used for the design of stages. Wrong design causes failures during production. On the other hand, the problems, which are likely to be encountered in manufacturing, can be observed and solved in the design stage by using finite element analysis.
In this study, the finite element analyses of external, internal, simultaneous internal and external tube upsetting, and tube expanding processes have been realized. During the analyses, the part and the die geometries at the intermediate stages, which have been designed according to the proposed procedures, have been used. The stress and strain distributions and die filling actions have been observed during the process. The process design and die geometries have been evaluated according to the finite element results. It has been seen that the recommended procedures generally generate acceptable designs. In some cases, it has been noted that minor modifications may be required on the design.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12605660/index.pdf |
| Date | 01 December 2004 |
| Creators | Tuzun, Aydin |
| Contributors | Darendeliler, Haluk |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.0022 seconds