Understanding of the shape and size of different features of human body from the scanned data is necessary for automated design and evaluation of product ergonomics. The traditional method of finding required body dimensions by manual measurements (Anthropometry) has many sociological, logistical and technical drawbacks such as prolonged time, skilled researcher for consistency and accuracy of measurements, undesirable physical contact between the subject and the researcher, required presence of people from different demographic categories or travel of researcher with equipments. If these di-
mensions are extracted from the stored digital human models, above drawbacks can be
eliminated.
With the emergence of laser based 3d scanners, it is now possible generate a large
database of surface models of humans from different demographic backgrounds but the
automatic processing of 3d meshes is under development. Though some commercial
packages are available for extraction of a limited number of dimensions from full body
scans, mostly belonging to topologically separable body parts like hands and legs, the dimensions associated with head and face are particularly not available in public domain. The processing of surface models of head and face from the automatic measurement
point of view is also not discussed in literature though this type of data has many practical applications like ergonomic design of close-fitting products like respiratory masks,ophthalmic frames (spectacles), helmets and similar head-mounted devices; Creation of a facial feature database for face modeling coding and reconstruction and for use in forensic sciences; Automated anthropological surveys and Medical growth analysis and aesthetic surgery planning.
Hence, in this thesis, a computational framework is developed for automatic detection, recognition and measurement of important facial features namely eyes, eyebrows, nose, mouth and moustache (if applicable) from scanned head and shoulder polyhedral models.
After preprocessing the scanned mesh manually to fill holes and remove singular
vertices, discrete differential geometric operators were implemented to compute surface normals and curvatures. Mean curvature magnitude was used as the primary metric to segment the mesh using morphological watershed algorithms which treat the mesh as a height map and separate the regions according to the water catchment basins.
After visualization it was hypothesized that the important facial features consist of
relatively high curvature regions and based on this hypothesis a much faster approach was then employed based on mathematical morphology to group the high curvature vertices into regions based on adjacency. The important feature regions isolated this way were then identified and labeled to be belonging to different facial features by a decision tree based on their relative spatial disposition. Adaptive selection of parameters was incorporated later to ensure robustness of this algorithm. Critical points of these identified features are recognized as the standard landmarks associated with those primary facial features. A number of clinically identified landmarks lie on the facial mid-line. An
efficient algorithm is proposed for detection and processing of the mid-line using a point sampling technique which is fast and has immunity to noise in the data.
An algorithm to find shortest path between two vertices while traveling along the
edges is implemented to measure on-surface distances and to isolate the nose.
Complete program comprising of curvature and surface normal computations, seg-
mentation and identification of 6 important features, facial mid-line processing, detection of total 17 landmarks and shortest path computations to separate nose takes about 2 minutes to work including visualization on a full resolution mesh of typically 2,15,521 Vertices and 4,30,560 Faces.
The algorithm was tested successfully on more than 40 faces with minor exceptions.
The results match human perception. The computed measurements were also compared with the physical measurements for a few subjects, the measurements were found to be in good agreement and satisfactory for its usage in product ergonomics and clinical applications.
| Identifer | oai:union.ndltd.org:IISc/oai:etd.ncsi.iisc.ernet.in:2005/341 |
| Date | 01 1900 |
| Creators | Deo, Dhanannjay |
| Contributors | Sen, Dibakar |
| Source Sets | India Institute of Science |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Rights | I grant Indian Institute of Science the right to archive and to make available my thesis or dissertation in whole or in part in all forms of media, now hereafter known. I retain all proprietary rights, such as patent rights. I also retain the right to use in future works (such as articles or books) all or part of this thesis or dissertation. |
Page generated in 0.0023 seconds