In the aerospace propulsion sector safety is an important driver to costs, vehicle design and mission capabilities. Hybrid rockets are considered some of the safest forms of chemical propulsion. That factor alone makes hybrid rocket propulsion systems desirable options.
Hybrid systems often benefit from multiple additional advantages over conventional solid and liquid propellant systems, including: minimal environmental impact, higher density impulses, start-stop-restart capabilities, simplistic random throttle control, low development costs, and basic transportation and storage requirements.
A major issue that continues to impact the effective use of hybrid systems, is that classical hybrid rocket fuels suffer in low regression rates. If fuel regression rates can be improved upon without diminishing any of the other beneficial factors to a hybrid rocket motor then a far greater market for such systems can be generated.
In this work, additively manufactured polypropylene solid fuel grains were infused with gels as a means of significantly altering the fuel burning rates in a lab scale hybrid rocket motor.
Gels based on Jet-A were created using both particulate (fumed silica, micro aluminum, nano aluminum) and polymeric (paraffin wax) gellants. The particle structure of the aluminum powders was characterized by means of microscopic imaging, particle size measurement, and thermal mass response analysis. The rheological behavior of the gels was characterized in order to determine the relationship between melt layer viscosity, viscoelastic properties, and combustion performance. High speed color video recording was used on select grains for spatially and temporally resolved three-color camera pyrometry analysis. The process showed promise in determining aluminized gel burn time across an entire rocket firing. The performance of the gel infused grains was compared to a traditional center perforated fuel grain, under similar flows of gaseous oxygen. Rocket motors fired with gel infused grains exhibited pressure increases of greater than 40%. Gel infused fuel grains demonstrated regression rate enhancements up to 90% higher than the baseline. The estimated gel regression rates were over 500% higher than the host polypropylene fuel. When the O/F was maintained near stoichiometric or lean conditions, c∗ efficiencies of the gel infused grains were similar to that of the baseline indicating thorough combustion of the gels. At low oxygen mass flows, the effects of gel infusion are not as significant, which is consistent with the liquefying fuel entrainment concept. / Master of Science / In the field of air and space flight, safety is an important driver to costs, vehicle design and mission capabilities. Hybrid rockets are considered some of the safest forms of vehicle lift systems compared to similar forms. That factor alone makes hybrid rockets desirable options.
Hybrid systems often benefit from multiple additional advantages over similar systems often used, including: minimal environmental impact, greater force for a given time and volume of fuel, start-stop-restart capabilities, simplistic random motor control, low development costs, and basic transportation and storage requirements.
A major issue that continues to impact the effective use of hybrid systems is that classical hybrid rocket fuels suffer in low burn rates. If fuel burn rates can be improved upon without diminishing any of the other beneficial factors to a hybrid rocket motor then a far greater market for such systems can be generated.
In this work, specially manufactured solid fuel grains were combined with gels as a means of significantly altering the fuel burning rates in a small scale test setup. Gels based on a type of jet fuel were created using multiple gel forming and modifying materials. The structure of two types of small scale aluminum powders was characterized by means of microscopic imaging, particle size measurement, and weight response to thermal changes. Properties specific to the gels were characterized in order to determine performance relationships to individual material properties. High speed color video recording was used on select grains for space and time resolved three-color camera temperature analysis. The process showed promise in determining aluminized gel burn time across an entire rocket firing. The performance of the gel modified grains was compared to a traditional fuel grain design, under similar flows of gaseous oxygen. Rocket motors fired with gel modified grains exhibited pressure increases of greater than 40%. Gel modified fuel grains demonstrated burn rate enhancements up to 90% higher than the traditional fuel grain design. The estimated gel burn rates were over 500% higher than the host polypropylene fuel. When ideal conditions were maintained, fuel burn efficiencies of the gel modified grains were similar to that of the traditional fuel grain design indicating ideal burning of the gels. At low oxygen flow rates, the effects of gel addition are not as significant, which is consistent with an expectant similar concept.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/114216 |
| Date | 28 March 2023 |
| Creators | Meier, James Hurley |
| Contributors | Aerospace and Ocean Engineering, Young, Gregory, Bortner, Michael J., Schetz, Joseph A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0029 seconds