This thesis describes a numerical modelling methodology to interpret dynamic fluctuations in pore-pressures to isolate the effects of loading associated with changes in total soil moisture (site water balance) alone. The methodology is required to enhance the data-interpretation and performance-assessment for potential applications of a novel piezometer-based, large-scale, geological weighing lysimeter. This interpretative methodology is based on a method of superimposing computer-based numerical analyses of independent causes of pore-pressure transients to separate the different pore-pressure responses. Finite element coupled load-deformation and seepage numerical models were used to simulate field-observed piezometric responses to water table fluctuations and loading induced by surface water balance (using meteorological data).<p>
Transient pore-pressures in a deep clay-till-aquitard arising from variations in the water table within a surface-aquifer were modelled and removed from the measured pore-pressure record (corrected for earth tide and barometric effects) to isolate and identify pore-pressure fluctuations arising from loading associated with site water balance. These estimates were compared to simulated pore-pressure responses to an independently measured water balance using meteorological instrumentation. The simulations and observations of the pore-pressure responses to surface water balance were in good agreement over the dry years of a 9-year period. Some periods of significant differences did occur during wet years in which runoff, which is not accounted for in the current analyses, may have occurred.<p>
The identification of pore-pressure response to total soil moisture loading using the developed numerical modelling methodology enhances the potential for the deployment of the piezometer-based geological weighing lysimeter for different applications which include real-time monitoring of site water balance and hydrological events such as precipitation and flooding. Interestingly, the disparity occurring during the wet years even suggests the potential to adapt the method to monitor runoff (net lateral flow).<p>
The methodology also demonstrated the capability to accurately estimate in situ elastic and hydraulic parameters. Calibration of the model yielded equivalent properties of the aquitard (hydraulic conductivity, Kv, of 2.1E-5 m/day and specific storage, Ss, of 1.36E-5 /m) for a Skemptons B-bar coefficient of 0.91 for an assumed porosity of 0.26. Sensitivity tests also provided insight into the consolidation and pressure propagation (swelling) behaviour of the aquitard under parametric variations. The parameters obtained are consistent with range of values reported for glacial clay till soil. Therefore, this work also provides a unique case history of a method for determining, large scale, in situ material properties for geo-engineers and scientists to explore by simply using piezometric and meteorological data.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-04122010-220038 |
| Date | 13 April 2010 |
| Creators | Anochikwa, Collins Ifeanyichukwu |
| Contributors | Barbour, S. Lee, van der Kamp, Garth, Samarasekera, Lal, Haug, Moir, Bashir, Rashid, Reeves, Malcom |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-04122010-220038/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.002 seconds