The usual Bridgman cell for measurement of thermal conductivity has been modified to allow but a minimum of conduction. The film thickness for liquids used is approximately 0.045 cm., and hence a very small sample will suffice for measurement. Differential thermocouples were used for determining the temperature drop. Most of the heat losses in the metal contact have been prevented by a needle mounting.
Measurements have been carried out on the four single-chain saturated aliphatic hydrocarbons C₂₂
H₄₆, C₂₆ H₅₄, C₃₀ H₆₂ and C₃₄ H₇₀ over a range of temperatures above their melting points. The thermal conductivities tend to increase with increasing molecular weight and with decreasing temperature. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/41391 |
| Date | January 1950 |
| Creators | Kolke, Oscar Ernest |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.003 seconds