The doctoral thesis deals with utilization of hydroforming technology for manufacturing of a new type of solar absorber, which has directly flow meandering structure and a structured surface consisting of pyramidal elements. Austenitic stainless steel X5CrNi18-10 is used as a material for absorbers production. At the beginning of the thesis, a literary research is performed, which is focused on particular methods of hydroforming technology, their applicability for this problem, forming limits determination and usability of numerical simulation. Based on the literature study, the production technology was developed by using parallel hydroforming technology and it was optimized by using a numerical simulation in the ANSYS software. Hydroforming parameters for two variants of the structured surface with pyramidal cavities with apex angle of 90° and 60° were determined from the calculations and the material tests.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:364591 |
| Date | January 2017 |
| Creators | Řiháček, Jan |
| Contributors | Mašek, Bohuslav, Lidmila, Zdeněk, Mrňa, Libor |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds