Topology optimization is a method providing new direction in designing of a technical objects. The aim of topology optimization is to find optimal distribution of material in design space. This diploma thesis is focused on optimization of aircraft wing rib num.6 of the airplane EV-55 using a software HW/Optistruct 7.0 implemented in a software package HyperWorks 7.0. The optimization of the rib was calculated under four different load cases. Resulting shapes of the rib were then tested by strenght calculations in software ANSYS 10.0. Finally, the obtained data of weights of optimized ribs were compared with the weight of the original rib.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:227875 |
| Date | January 2008 |
| Creators | Kopřiva, Lubomír |
| Contributors | Suchánek, Miroslav, Petruška, Jindřich |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds