This master thesis focuses on problematics of GOOSE messages used for evaluation of blocking conditions of substations in the electrical power plant in Opatovice (EOP). Firstly, the thesis describes the multifunctional electrical protection relay 7SJ64 as well as GOOSE messages, that are run by protocol IEC 61850. Next, it contains a brief description of the energy consumption of EOP itself, since the project was written for its protection relays. In the practical part of the thesis, an experimental network consisting of two distinct substations with three 7SJ64 multifunctional protection relays was designed together with simple blocking conditions. These require information about the state of circuit breakers. The whole communication is carried by GOOSE messages. Moreover, to inform about the loss of GOOSE messages, the logical function SI_GET_S (decoder) was used inside the coding interface of DIGSI programme called CFC. This function was then tested in the experimental network using each different condition, that experienced interruptions of communication caused either by simulated defect of optical cabels, or by „user‘s mistakes“ in the settings of communication parameters in DIGSI. Finally, the system protecting from the loss of GOOSE messages was incorporated into the existing project evaluating blocking conditions in the block substation of EOP.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400562 |
| Date | January 2019 |
| Creators | Ditrych, Marek |
| Contributors | Fíla, Vlastimil, Orságová, Jaroslava |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0016 seconds