<p>U okviru ove doktorske disertacije ispitani su i utvrđeni optimalni uslovi za proces ljuštenja semena suncokreta visokooleinskog tipa, kao sirovine za proizvodnju ulja. Sprovedena istraživanja su dala podatke o optimalnim vrednostima sadržaja vlage u semenu i pritiska vazduha u ljuštilici na osnovu kojih je utvrđen model za ljuštenje semena. Sprovedenim istraživanjima obuhvaćeno je i ispitivanje uticaja promenljivih tehnoloških parametara, sadržaja ljuske u opsegu od 0 do 20% i sadržaja nečistoća u opsegu od 0 do 10% na sastav i kvalitet hladno presovanih ulja i pogače, prinos ulja, oksidativnu stabilnost, senzorski kvalitet i boju hladno presovanih ulja semena suncokreta visokooleinskog tipa.<br />Dobijeni rezultati su obrađeni primenom savremenih klasifikacionih (klaster analiza i analiza glavnih kompomenata) i regresionih hemometrijskih metoda i postavljeni hemometrijski modeli čija bi primena doprinela proizvodnji hladno presovanog ulja vrhunskog kvaliteta i visoke oksidativne stabilnosti. Utvrđeno je da su definisani modeli statistički validni i da se mogu primeniti za optimizaciju tehnoloških parametara u proizvodnji hladno presovanog ulja semena suncokreta visokooleinskog tipa. Validnost postavljenih modela, odnosno kvalitet dobijenih korelacija su procenjeni na osnovu parametara unakrsne validacije.<br />Maksimalna efektivnost ljuštenja semena suncokreta visokooleinskog tipa može se postići pri optimalnim uslovima tj. sadržaju vlage u semenu 6,0% i pritisku vazduha u ljuštilici 800 kPa. Hladno presovano ulje semena suncokreta visokooleinskog tipa se, u pogledu sastava i kvaliteta ulja i pogače, prinosa ulja, oksidativne stabilnosti, senzorskog kvaliteta i boje ulja, može proizvoditi od semena koje sadrži 10-20% ljuske i 0-5% nečistoća.</p> / <p>In this dissertation the optimal conditions for the dehulling process of high-oleic sunflower seeds, as raw material for oil production, were tested and determined. The conducted studies provided data for the optimal values of moisture content in the seed and the air pressure in the seed dehulling machine, what presented the base for determination of the dehulling model. Also, conducted studies examine the effect of variable technological parameters, such as content of hull (ranging from 0 to 20%) and the impurities content (ranging from 0 to 10%) on the composition and quality of oil and cake, oil yield, oxidative stability, sensory quality and colour of cold pressed high-oleic sunflower oil.<br />The obtained results were analyzed by modern classification (cluster analysis and principal component analysis) and regression chemometrics methods, and chemometric models whose implementation could contribute to the production of cold pressed oil of high quality and high oxidative stability were set. It was found that the defined mathematical models are statistically valid and that they could be used to optimize the technological parameters of production of cold pressed high-oleic sunflower oil. The validity of the set models, that is the quality of obtained correlations, were estimated based on the parameters of cross-validation.<br />The maximum effectiveness of high-oleic sunflower seeds dehulling can be achieved under optimal conditions, i.e. when the moisture content in seed is 6,0% and when the air pressure in seed dehulling machine is 800 kPa. Regarding composition and quality of the oil and cake, oil yield, oxidative stability, sensory quality and color, cold pressed high-oleic sunflower oil could be produced from seed containing 10-20% hull and 0-5% impurities.</p>
| Identifer | oai:union.ndltd.org:uns.ac.rs/oai:CRISUNS:(BISIS)95781 |
| Date | 30 December 2015 |
| Creators | Romanić Ranko |
| Contributors | Milanović Spasenija, Podunavac-Kuzmanović Sanja, Lončar Eva, Jocić Siniša |
| Publisher | Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, University of Novi Sad, Faculty of Technology at Novi Sad |
| Source Sets | University of Novi Sad |
| Language | Serbian |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0012 seconds