The project elaborated design of injection mould for production of corner cover, which serves to protect a reprobox from mechanical damage. The production possibilities were considered at the beginning. The injection molding technology was chosen from available technologies. The first part of the thesis is theoretic, plastics and injection molding are investigated. The choice of suitable polymer and the entire draft of mold is in the second part of thesis. The final mold is two-cavity with cold runner system. The technical and economic assessment of the proposal is carried out in the last part of thesis.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417172 |
| Date | January 2020 |
| Creators | Hrdina, Vojtěch |
| Contributors | Ohnišťová, Petra, Žák, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0085 seconds