Injection molding technology is utilized for a wide range of applications from mobile phone covers to bumper fascia of automotive vehicles. Foam injection molding (FIM) is a branched manufacturing process of conventional injection molding, but it was designed to take advantage of existing foaming technology, including material cost saving and weight reduction, and to provide additional benefits such as improvement in dimensional stability, faster cycle time, and so on. Gas-assisted injection molding (GAIM) is another supplemental technology of injection molding and offers several advantages as well. This thesis study takes the next step and develops innovative gas-assisted foam injection molding (GAFIM) technology, which is the result of a synergistic combination of two existing manufacturing technologies, FIM and GAIM, in order to produce a unique thermoplastic foam structure with proficient acoustic properties. The foam structure manufactured by GAFIM consists of a solid skin layer, a foam layer, and a hollow core; and its 6.4-mm thick sample outperformed the conventional 22-mm thick polyurethane foam in terms of the acoustic absorption coefficient. With respect to foaming technology, GAFIM was able to achieve a highly uniform foam morphology by completely decoupling the filling and foaming phases. Moreover, the additional shear and extensional energies from GAFIM promoted a more cell nucleation-dominant foaming behavior, which resulted in higher cell density and smaller cell sizes with both CO2 and N2 as physical blowing agents. Lastly, it provided more direct control of the degree of foaming because the pressure drop and pressure drop rate was controlled by a single parameter, that being the gas injection pressure. In summary, innovative, gas-assisted foam injection molding technology offers not only a new strategy to produce acoustically functioning thermoplastic foam products, but also technological advantages over the conventional foam injection molding process. Gas-assisted foam injection molding can become the bedrock for more innovative future applications.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/43608 |
| Date | 10 January 2014 |
| Creators | Jung, Peter Ungyeong |
| Contributors | Park, Chul B. |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds