This thesis aims at the study of small to large surface deformation that can be detected using the remote sensing interferometric synthetic aperture radar (InSAR) methods. The new developments of InSAR processing techniques allow the monitoring of surface deformation with millimeter surface change accuracy. Conventional InSAR use a pair of SAR images ("Master" and "Slave" images) in order to measure the phase difference between the two images taken at different times. The uncertainties in measurements using the conventional InSAR due to the atmospheric delay, the topographic changes and the orbital artifacts are the handicaps of this method. The idea of InSAR method is to measure the phase difference between tow SAR acquisitions. These measure refere to the ground movment according to the satellite position. In interferogram the red to blue colors refere to the pixel movement to or far from the satellite position in Line-Of-Sight (LOS) direction. In 2000's, Radar spacecraft have seen a large number of launching mission, SAR quisitions and InSAR applicability have seen explosion in differents geophysical studies due to the important SAR datas and facility of data accessibity. This SAR-mining needs other type and generation of InSAR processing.In 2001, Ferretti and others introduce a new method called Permanent Scatterer InSAR (PS) that is based on the use of more than one Slave image in InSAR processing with the same Master image. This method allows enhancing the LOS signal for each pixel (PS) by using the best time and/or space-correlated signal (from amplitude and/or from phase) for each pixel over the acquisitions. A large number of algorithms were developed for this purpose using thesame principle (variantes). In 2002, Berardino et al developed new algorithm for monitoring surface deformation based on the combination of stack of InSAR results from SAR couples respecting small baseline (SB) distance. Nowadays, these two methods represent the existing time series (TS) analysis of SAR images approaches. In addition, StaMPS software introduced by Hooper and others, in 2008 is able to combine these two methods in order to take advantages from both of this TS approaches in term of best signal correlation and reducing the signal noise errors. In this thesis, the time series studies of surface changes associate to differents geophysical phenomena will have two interest: the first is to highlight the PS and SBAS results and discuss the fiability of obtained InSAR signal with comparation with the previous studies of the same geophysical case or observations in the field and in the second time, the combined method will also validate the results obtained separately with differents TS techniques. The validation of obtained signal is assured by these two steeps: Both of PS and SBAS methods should give relatively the same interferograms and LOSdisplacement signal (in term of sign and values), in addition these results will be compared with the previous studies results or with observations on the field.In this thesis, the InSAR techniques are applied to different case-studies of small surface deformation [...]
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-01019429 |
| Date | 02 July 2013 |
| Creators | Bouraoui, Seyfallah |
| Publisher | Université de Strasbourg |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0023 seconds