Return to search

Multi-Physics Sensing and Real-time Quality Control in Metal Additive Manufacturing

Laser powder bed fusion is one of the most effective ways to achieve metal additive manufacturing. However, this method still suffers from deformation, delamination, dimensional error, and porosities. One of the most significant issues is poor printing accuracy, especially for small features such as turbine blade tips. The main reason for the shape inaccuracy is the heat accumulation caused by using constant laser power regardless of the shape variations.
Due to the highly complex and dynamic nature of the laser powder bed fusion, improving the printing quality is challenging. Research gaps exist from many perspectives. For example, the lack of understanding of multi-physical melt pool dynamics fundamentally impedes the research progress. The scarcity of a customizable laser powder bed platform further restricts the possibility of testing the improvement strategies. Additionally, most state-of-the-art quality inspection techniques suitable for laser powder bed fusion are costly in economic and time aspects. Lastly, the rapid and chaotic printing process is hard to monitor and control.
This dissertation proposes a complete research scheme including a fundamental physics study, process signature and quality correlation, smart additive manufacturing platform development, high-performance sensor development, and a robust real-time closed-loop control system design to address all these issues. The entire research flow of this dissertation is as follows:
1. This work applies and integrates three advanced sensing technologies: synchrotron X-ray imaging, high-speed IR camera, and high-spatial-resolution IR camera to characterize the melt pool dynamics, keyhole, porosity formation, vapor plume, and thermal evolution in Ti-64 and 410 stainless steel. The study discovers a strong correlation between the thermal and X-ray data, enabling the feasibility of using relatively cheap IR cameras to predict features that can only be captured using costly synchrotron X-ray imaging. Such correlation is essential for thermal-based melt pool control.
2. A highly customizable smart laser powder bed fusion platform is designed and constructed. This platform integrates numerous sensors, including but not limited to co-axial cameras, IR cameras, oxygen sensors, photodiodes, etc. The platform allows in-process parameter adjusting, which opens the boundary to test various control theories based on multi-sensing and data correlations.
3. To fulfill the quality assessment need of laser powder bed fusion, this dissertation proposes a novel structured light 3D scanner with extraordinary high spatial resolution. The spatial resolution and accuracy are improved by establishing hardware selection criteria, integrating the proper hardware, designing a scale-appropriate calibration target, and developing noise reduction procedures during calibration. Compared to the commercial scanner, the proposed scanner improves the spatial resolution from 48 µm to 5 µm and the accuracy from 108.5 µm to 0.5 µm.
4. The final goal of quality improvement is achieved through designing and implementing a real-time closed-loop system into the smart laser powder bed fusion platform. The system regulates the laser power based on the monitoring result from a novel thermal sensor. The desired printing temperature is found by correlating the laser power, the dimensional accuracy, and the thermal signatures from a set of thin-wall structure printing trails. An innovative high-speed data acquisition and communication software can operate the whole system with a graphic user interface. The result shows the laser power can be successfully controlled with 2 kHz, and a significant improvement in small feature printing accuracy has been observed. / Doctor of Philosophy / Laser powder bed fusion is one of the most effective ways to achieve metal additive manufacturing. However, this method still suffers from defects such as deformation, delamination, dimensional error, and porosities. Due to the highly complex and dynamic nature of the laser powder bed fusion, improving the printing quality is challenging. Research gaps exist from many perspectives, such as the lack of understanding of melt pool dynamics; the scarcity of a customizable laser powder bed platform; the need for suitable sensors; and the missing of a control system that can effectively regulate the rapid and chaotic printing process.
This dissertation proposes a complete research scheme to address all these issues. The fundamental study characterizes the melt pool dynamics and discovers a strong correlation between the melt pool thermal and geometrical data, enabling thermal-based melt pool control. Following that, a highly customizable smart laser powder bed fusion platform is designed and constructed. The platform allows in-process parameter changes, opening the boundary to test various control theories. A novel structured light 3D scanner with an ultra-high spatial resolution was proposed to fulfill the quality assessment need. The final goal of quality improvement is achieved through designing and implementing a real-time closed-loop system into the smart laser powder bed fusion platform. The system regulates the laser power based on real-time thermal monitoring. The result shows the laser power can be successfully controlled with 2 kHz, and a significant improvement in printing accuracy is achieved.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/115386
Date08 June 2023
CreatorsWang, Rongxuan
ContributorsIndustrial and Systems Engineering, Kong, Zhenyu, Yue, Xiaowei, Yu, Hang, Johnson, Blake
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeDissertation
FormatETD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0017 seconds