Structured Light Imaging (SLI) is a means of digital reconstruction, or Three-Dimensional (3D) scanning, and has uses that span many disciplines. A projector, camera and Personal Computer (PC) are required to perform such 3D scans. Slight variances in synchronization between these three devices can cause malfunctions in the process due to the limitations of PC graphics processors as real-time systems. Previous work used a Field Programmable Gate Array (FPGA) to both drive the projector and trigger the camera, eliminating these timing issues, but still needing an external camera. This thesis proposes the incorporation of the camera with the FPGA SLI controller by means of a custom printed circuit board (PCB) design. Featuring a high speed image sensor as well as High Definition Multimedia Interface (HDMI) input and output, this PCB enables the FPGA to perform SLI scans as well as pass through HDMI video to the projector for Spatial Augmented Reality (SAR) purposes. Minimizing ripple noise on the power supply by means of effective circuit design and PCB layout, realizes a compact and cost effective machine vision sensing solution.
| Identifer | oai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:ece_etds-1136 |
| Date | 01 January 2018 |
| Creators | Ruffner, Matt Phillip |
| Publisher | UKnowledge |
| Source Sets | University of Kentucky |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations--Electrical and Computer Engineering |
Page generated in 0.0016 seconds