Return to search

Impedanční měření olověného akumulátoru / Impedance Measurement of Lead-acid Accumulator

This dissertation deals with impedance measurements of lead-acid accumulator. Main aim was to study recent problems of impedance measurements of lead-acid accumulator and most importantly to extend difference method and also to interpret its results. The original DC difference method was developed earlier at our Power Sources Laboratory of Department of Electrical and Electronic Technology. The DC difference method and also the new AC difference method are both non-destructive, which means that experimental data can be obtained in situ. New method provides more accurate set of information because of its wide frequency range nature. Electrodes of lead-acid accumulator were analysed with special attention to collector / active mass double layer and to active mass itself. Various states and operation regimes were investigated. Obtained data contributed to better understanding of involved degradation mechanisms. Main aim of other experiment was to observe and interpret corrosion rates of electrode collector composed of various lead alloys. Last but not least charge and discharge regimes e.g. 100% deep of discharge regime, partial state of charge (PSoC) regime and pulse charge regime were analysed. BioLogic VSP was the device used for almost all experimental measurements. It takes a lot of effort to optimise VSP operation regime. Best operation regime of VSP for the difference method was suggested too.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233593
Date January 2013
CreatorsAbraham, Pavel
ContributorsDostál, Zdeněk, Jareš, Petr, Bača, Petr
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0016 seconds