Return to search

Využití odpadního tepla kompresorů do soustavy centrálního zásobování teplem pomocí absorpčního tepelného čerpadla / Utilization of compressor waste heat into the district heating system by means of an absorption heat pump

With the growth of energy consumption and the optimization of industrial processes worldwide, new energy sources have been explored and investigated. Waste heat is a potential source for the generation of electricity and heat. This heat can be reused at different stages of industrial processes by using absorption heat pumps, which transfer thermal energy from a location with a lower thermal potential to a location with a higher thermal potential. This research work is basically focused on the evaluation of different absorption heat pumps implemented in the SAKO Brno incineration plant. To carry out this purpose, a bibliographic review of this technology has been carried out worldwide, then the mass and energy balance in the compressor is presented, from which the waste heat to be recovered with the pump will be obtained. Using the EES software, the mass and energy balance of the selected pumps is performed, then the amount of heat and electrical energy generated by the plant when implementing each of the pumps is shown, and finally the economic analysis is presented The design and implementation of a heat exchanger in the system is also included as an essential part of improving operation. The best option arises from the highest operational efficiency at the lowest possible cost.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:433480
Date January 2020
CreatorsAranguren Campos, Fabian Alexis
ContributorsBaláš, Marek, Pospíšil, Jiří
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0016 seconds