Future nanofiltration (NF) membranes used for selective separations of ions and small organic molecules must maintain performance in environments where high concentrations of total dissolved solvents or foulants are present. These challenges can be addressed through the development of composite membranes, as well as the engineering of enhanced surface properties and operating conditions for existing commercial membranes.
In this work, ion transport through commercial thin film composite (TFC) polyamide NF membranes were studied in both lab-prepared salt solutions and industrial wastewater. The dependence of several variables on ion rejection was investigated, including ion radius, ion charge, ionic strength, and temperature. The impact of scaling and increasing ionic concentration on membrane performance during recovery of industrial wastewater was investigated. Fouling of the membrane surface was reduced by enhancing commercial NF membrane surfaces via aqueous-phase esterification of lignin sulfonate.
NF membranes were also created utilizing an ionic liquid solvent (1-ethyl-3-methylimidazolium acetate) to integrate composite materials into cellulose. Composite materials such as graphene oxide quantum dots, iron III particles, and lignin have been shown to be interact strongly with cellulose in solution with ionic liquid and bind together cellulose chains via hydrogen bonds following nonsolvent induced phase inversion. Studies suggest the composite materials modify membrane surface chemistry and improve selectivity of small organic molecules (~300 nm) while allowing for the complete passage of ions.
Identifer | oai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:cme_etds-1099 |
Date | 01 January 2019 |
Creators | Colburn, Andrew Steven |
Publisher | UKnowledge |
Source Sets | University of Kentucky |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Theses and Dissertations--Chemical and Materials Engineering |
Page generated in 0.0017 seconds