Return to search

MODELLING OF THE POWER SYSTEM OF GOTLAND INPSS/E WITH FOCUS ON HVDC LIGHT

The purpose with this project is to develop a model of the whole power system of Gotland in the power system simulation software PSS/E. A model of the whole power system of Gotland has earlier been used in the power system simulation software Simpow but now there is a need to develop a model in PSS/E. In the power system of Gotland there are several components that need to be modelled such as lines, loads, transformers, shunt impedances, synchronous machines, asynchronous machines, an HVDC Classic link and an HVDC Light link. These components are modelled in the Simpow model and needs to be converted to the PSS/E model. The aim is to develop a model in PSS/E that is as equal as possible to the model in Simpow. Especially the HVDC Light link at Gotland has been investigated in the project. A problem with converting data from Simpow to PSS/E is that the models of several components differ in Simpow and PSS/E. Lines and shunt impedances can be modelled in the same way but the models for loads, transformers, synchronous machines, asynchronous machines, the HVDC Classic link, and the HVDC Light link differ in Simpow and PSS/E. The models in Simpow are converted to the models in PSS/E in an as equal way as possible. The results in PSS/E are analyzed and compared with the Simpow model. In the project we have also made a test of fault simulations in time-domain simulations in PSS/E. The aim with this test is to verify the PSS/E calculations when a three-phase or a single-phase fault is applied. The reason for that is that PSS/E only calculates using positivesequence components and therefore only is able to calculate exact during circumstances of symmetrical loads and faults. The result shows that the calculations for both symmetrical and unsymmetrical faults in PSS/E are correct concerning the positive-sequence components. A drawback in PSS/E is, however, that we do not have any information concerning the negativeand zero-sequence  components, which results in that we cannot calculate the three phasequantities.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-118949
Date January 2008
CreatorsBrask, Martin
PublisherKTH, Elektriska energisystem
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationEES Examensarbete / Master Thesis ; XR-EE-ES 2008:006

Page generated in 0.0024 seconds