Many gas turbine engines operate in harsh environments where the engine can ingest solid particles. Particles can accelerate the deterioration of an engine and reduce the engine’s service life. Understanding particle interactions with the materials used in gas turbines, at representative engine conditions, can improve the design and development of turbomachinery operating in particle laden environments. Coefficient of Restitution (COR) is a measure of the particle/wall interactions and is used to study erosion and deposition. This study presents data taken using the Virginia Tech Aerothermal Rig. Arizona Road Dust (ARD) of 20-40 μm is injected into a flow field to measure the effects of temperature and velocity on particle rebound from a polished high temperature material coupon. The high temperature coupon was tested at different temperatures of ambient (300K), 873K, 1073K, 1173 K, 1223 K, 1273 K, and 1323 K while the velocity of the flow field was held constant at 28 m/s or 70 m/s. The impingement angle of the coupon was varied from 30° to 80° for each temperature tested. The results show an increase in deposition as the temperature approaches the melting temperature of sand. The results have also been compared to previously published literature. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/24822 |
| Date | 13 January 2014 |
| Creators | Murdock, Matthew Keith |
| Contributors | Mechanical Engineering, Ng, Wing Fai, Ekkad, Srinath, Tafti, Danesh K. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0013 seconds