Return to search

<strong>LARGE-EDDY SIMULATION OF ROTATIONALLY- AND EXTERNALLY-INDUCED  INGRESS IN AN AXIAL RIM SEAL OF A STATOR-ROTOR CONFIGURATION</strong>

<p>  </p>
<p>In gas turbines, the hot gas exiting the combustor can be as high as 2000 <sup>o</sup>C, and some of this hot gas enter into the space between the stator and rotor disks (wheelspace). Since the hot gas entering with its high temperatures could damage the disks, hot-gas ingestion must be minimized. This is done by using rim seals and by introducing a flow of cooler air from the compressor (sealing flow) into the wheelspace. </p>
<p>Ingress and egress into rim seals are driven by the stator vanes, the rotor and its rotation, and the rotor blades. This study focuses on the first-stage turbine, where ingress could cause the most damage and has two parts. The first part focuses on understanding ingress and egress driven by the rotor and its rotation, known as rotationally-induced ingress, by studying ingress about an axial seal in a stator-rotor configuration without vanes and without blades. The second part focuses on understanding ingress and egress driven by stator vanes, known as externally-induced ingress, by studying a stator-rotor configuration with vanes but no blades, where the ratio of the external Reynolds number to the rotational Reynolds number is 0.538. For both parts, solutions were generated by wall-resolved large-eddy simulation (LES) based on the WALE subgrid model and by Reynolds-averaged Navier-Stokes (RANS) based on the SST model. For both stator-rotor configurations, the grid-independent solutions obtained were compared with available experimental data.   </p>
<p>Results obtained for the configuration without vanes and blades show Kelvin-Helmholtz instability (KHI) to form even without swirl from the hot-gas flow and to create a wavy shear layer on the rotor. Also, Vortex shedding (VS) occurs on the backward-facing side of the seal and impinges on the rotor side of the seal. The KHI and VS produce alternating regions of high and low pressures about the rotor-side of the axial seal, which cause ingress to start on the rotor side of the seal. Results obtained for the configuration with vanes but no blades show both LES and RANS to correctly predict the coefficient of pressure, C<sub>p</sub>, upstream of the axial seal. However, only LES was able to correctly predict the sealing effectiveness. This shows C<sub>p</sub> by itself maybe is inadequate in quantifying externally-induced ingress. One reason why RANS was unable to predict sealing effectiveness is significantly under predicting the pressure drop on the rotor surface, which affected the pressure variation along the hot-gas path and hence the pressure difference across the axial seal, which ultimately drives ingress. </p>

  1. 10.25394/pgs.23535513.v1
Identiferoai:union.ndltd.org:purdue.edu/oai:figshare.com:article/23535513
Date19 June 2023
CreatorsSabina Nketia (16385142)
Source SetsPurdue University
Detected LanguageEnglish
TypeText, Thesis
RightsCC BY 4.0
Relationhttps://figshare.com/articles/thesis/_strong_LARGE-EDDY_SIMULATION_OF_ROTATIONALLY-_AND_EXTERNALLY-INDUCED_INGRESS_IN_AN_AXIAL_RIM_SEAL_OF_A_STATOR-ROTOR_CONFIGURATION_strong_/23535513

Page generated in 0.0019 seconds