The objective of this thesis work was to implement all the hardware and software necessary to simulate the functionality of a Vector Network Analyzer (VNA). With equipment that is already available, and is common in a measurement station, the most common functions of a VNA were implemented, using an Vector Signal Generator, that provide the signal for testing, and a Vector Signal Analyzer, to make all the amplitude and phase measurements. With these instruments and the appropriate software that control them, the basic functionality of a Vector Network Analyzer can be achieved with a reasonable accuracy. With this system, we can reduce costs, avoiding the need of a real VNA and take advantage off instruments that are already available in a laboratory. A Complete measurement system of all four scattering parameters is proposed at the end of the report for future implementation. With this implementation all the different S-parameter measurements were made with an acceptable accuracy that can be comparable to a commercial VNA.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hig-704 |
| Date | January 2007 |
| Creators | Rodriguez, Ramón |
| Publisher | Högskolan i Gävle, Institutionen för teknik och byggd miljö |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0022 seconds