A titanium alloy (Ti-6Al-4V STOA) plate material was provided by the University of Dayton Research Institute from a previous U.S. Air Force high-cycle fatigue study. Fatigue-crack-growth tests on compact, C(T), specimens have been previously performed at Mississippi State University on the same material over a wide range in rates from threshold to near fracture for several load ratios (R = Pmin/Pmax). These tests used the compression pre-cracking method to generate fatigue-crack-growth-rate data in the near-threshold regime. Current load-reduction procedures were found to give elevated thresholds compared to compression pre-cracking methods. A crack-closure model was then used to determine crackront constraint and a plasticity-corrected effective stress-intensityactor-range relation over a wide range in rates and load ratios. Some engineering estimates were made for extremely slow rates (small-crack behavior), below the commonly defined threshold rate. Single-edge-notch-bend, SEN(B), fatigue specimens were machined from titanium alloy plates and were fatigue tested at two constant-amplitude load ratios (R = 0.1 and 0.5) and a modified Cold-Turbistan engine spectrum. Calculated fatigue lives from FASTRAN, a fatigue-life-prediction code, using small-crack theory with an equivalent-initiallaw-size (semi-circular surface flaw) of 9 µm in radius at the center of the semi-circular edge notch fit the constant-amplitude test data fairly well, but underpredicted the spectrum loading results by about a factor of 2 to 3. Life predictions made with linear-cumulative damage (LCD) calculations agreed fairly well with the spectrum tests.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-3241 |
| Date | 04 May 2018 |
| Creators | Kota, Kalyan Raj |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0019 seconds