Two failure mechanisms in a double lap joint are investigated. Analytical models of net-section and gross-section failure modes are proposed to describe these mechanisms. The effects of lamping force, interference fit, maximum axial load and WDCP on fatigue performance of the joint are included in the models. The effect of WDCP is assumed to give a reduction in friction coefficient. Three types of stress reduction factors are proposed in the net-section failure model to account for these parameters. The stress reduction factors modify stress range that is used in crack growth calculation. If there are no effects of these parameters, the stress reduction factors are equal to one. Two types of fretting stress are introduced in gross-section failure model to describe either sliding contact or incipient sliding contact on faying surface. The fretting stress is combined with body stress to modify stress range. The net-section failure model predicts that fatigue life is increasing as interference fit, clamping force and friction coefficient increase. The gross-section failure model predicts that fatigue life is decreasing as clamping force and friction coefficient increase. Both models predict that fatigue life is decreasing as maximum axial load increases. Transition of the failure mode occurs earlier as friction coefficient and interference fit increase, while it is delayed as maximum axial load increases. A transition parameter is proposed to establish a relationship between the four main parameters. The transition parameter is expressed in a polynomial equation. It gives an optimum combination of the four main parameters in order to achieve relatively higher fatigue life by having gross-section failure mode. Finite element analysis and fatigue testing are performed to validate the models. The finite element and the analytical models show that stress concentration factor at the edge of the hole is decreasing as clamping force increases. The rate of decrease of stress concentration factor is increasing as friction coefficient increases. While stress concentration factor on the faying surface is increasing as clamping force and friction coefficient increase. Fatigue testing reveals that the fatigue life of the joint is in good agreement with the predicted fatigue life of the proposed models.
| Identifer | oai:union.ndltd.org:ADTP/240777 |
| Date | January 2005 |
| Creators | Dhamari, Ruby Dharma Adji, Aerospace, Civil & Mechanical Engineering, Australian Defence Force Academy, UNSW |
| Publisher | Awarded by:University of New South Wales - Australian Defence Force Academy. School of Aerospace, Civil and Mechanical Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Ruby Dharma Adji Dhamari, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0024 seconds