Return to search

Vstupní díl UHF přijímače s velmi nízkou spotřebou / Tuner for UHF Receiver with Low Power Consuption

The purpose of this work was to make a proposal for input parts of receiver for band 430 to 440 MHz. A model of chosen semiconductor triode BFP540 was created in simulation software. Possibilities how to decrease consumption of this semiconductor triode, keeping the profit, were investigated through the simulation.In compromise consumption, keeping the profit of the amplifier - an optimal operating point for this semiconductor triode UCE = 1,2 V and IC = 2 mA was found. It was tested through the testing wiring with noise microstrips conformity. Ascertained knowledge was used for construction of tuner for UHF receiver. An operating point of input amplifier of UHF receiver was owing to power supply amplifier forced for bigger effectiveness to UCE = 2,65 V and IC = 2,0 mA. Suppression of mirror frequency is provided with Helix filter of the third order, because of intermediate frequency 10,7 MHz. Mixing on intermediate frequency is made again by semiconductor triode BFP540. Selectivity of receiver is provided with intermediate frequency crystal filter 10,7 MHz with bandwidth 15 kHz. Designed input part enables reception of SSB, FM and digital types of modulation.Bandwidth intermediate frequency exit is adapted to this request To receive particular modulation , it is necessary to complete intermediate frequency signal way with appropriate intermediate frequency filter.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217183
Date January 2008
CreatorsKaštánek, Martin
ContributorsVágner, Petr, Urbanec, Tomáš
PublisherVysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds