A poly-generation system can be defined as the simultaneous and collocated generation of two or more energy supply types, aimed to maximize the utilization of the thermodynamic potential (efficiency) of the consumed energy resources. A Polygeneration system may involve co-generation (power and heat) or tri-generation (power, heat, and cold) processes and may also be connected to a district energy system. A poly-generation plant reclaims heat in a useful form that would be wasted otherwise in separate electricity and heat (and chilled water in some cases) generating systems. By this way a poly-generation plant provides a variety of benefits including improved efficiency and fuel savings, reduction of the primary
energy demand total cost of utility service and unit fuel cost, independency for energy and protection of environment. With the overall efficiencies in the range of 70-90%, poly-generation systems are gaining popularity all around the world. including Turkey. In spite of all their potential benefits and increasing interest for poly-generation systems, there is not yet any rating, testing, metrication and classification guidelines and standards. It is indeed very important to rate the performance and energy savings potential, determine the heat and power outputs, estimate the system efficiency and the ratio of the split of the power produced between thermal and electric. These are the information which are hard to determine since there are not enough common test standards, rating standards and nor consensus-based terminology for combined heat and power systems in the world literature. Even the classification of the cogeneration systems is hardly globalized. Aim of this study is to develop a common procedure with respect to the above shortcomings for testing and rating poly-generation systems under realistic operating conditions with accurate formulae which will help to contribute energy and exergy economy by establishing a robust metrication standard based on new evaluation parameters. This study aims to find a procedure to evaluate a poly-generation system by establishing standard test methods and evaluation tools in terms of parameters like energy and exergy characteristics of thermal and electric loads, temperature demand and power split for determining operational characteristics of the system. This may be achieved by revising and expanding DIRECTIVE 2004/8/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. A case study is expected to be based on a trigeneration power plant to be received within the framework of the EU FP6 HEGEL Poly-generation project, to be tested at METU, which has a capacity of 145 kW electric and 160 kW useful heat.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12612538/index.pdf |
| Date | 01 October 2010 |
| Creators | Bingol, Ekin |
| Contributors | Eralp, Cahit Osman |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | Ph.D. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for METU campus |
Page generated in 0.0019 seconds