A Computational Fluid Dynamics (CFD) simulation of the Bishop Rotary Valve (BRV) engine is developed. The simulation used an existing commercial CFD code, CFX 4.3, with a number of new routines written to allow it to simulate the conditions and motions involved in an internal combustion engine. The code is extensively validated using results from other researchers, and several new validations are performed to directly validate the code for simulating internal combustion engine flows. Firstly, tumble vortex breakdown during the compression stroke of a square piston model engine is modelled. The results of the simulation are validated against published high quality experimental data. Both two- and three-dimensional models are tested, using the k-e and Reynolds stress turbulence models. The Reynolds stress turbulence model simulations successfully predicted the tumble break down process during the compression stroke. A simple three-dimensional Large Eddy Simulation model is also presented. The numerical simulation is then applied to the BRV engine. An in-cylinder flow field not previously described is discovered, created by the unique combustion chamber shape of the BRV engine. The flow field is not adequately described by the traditional descriptions of engine flows, being squish, swirl and tumble. The new flow structure is named 'dual cross tumble', and is characterised by two counter-rotating vortices in the cross tumble plane on either side of the inlet air jet. Analysis of the dual tumble structure indicates that it is most beneficial in high bore to stroke ratio engines. This flow structure has been predicted or visualised by a small number of previous researchers, however no published research has recognised its significance or potential benefits. The validated code is then used to predict the effect of modifying the valve cross sectional area, the effect of the inlet manifold wave, the effect of heat transfer from the inlet manifold walls, the effect of bore to stroke ratio, and the effect of engine speed. This work presents a numerical simulation of a new rotary valve engine technology. This opens up a whole new area of engine aerodynamics research as no detailed examination of the flows in a rotary valve engine have been presented previously. In the process, it discovers a new compression stroke turbulence generation mechanism, 'dual cross tumble', which offers the potential of performance levels not possible using poppet valve engines.
| Identifer | oai:union.ndltd.org:ADTP/269604 |
| Date | January 2001 |
| Publisher | University of Technology, Sydney. Faculty of Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English, en_AU |
| Detected Language | English |
| Rights | http://www.lib.uts.edu.au/disclaimer.html, Copyright Glenn Horrocks |
Page generated in 0.0014 seconds