The presented Master Thesis is focused on the structural analysis of the proximal femur on which the Proximal Femoral Nail (PFN) and Proximal Femoral Tele-Screw (PFT) systems are applied. These systems are used for a treatment of the intertrochanteric and femoral neck fractures. However, in some cases a loss of stability of the systems may be expected. The presented thesis describes a development of numerical models in which stress distribution of implants and strain distribution of bone tissue are compared. Numerical models were created from real objects. The model of femur geometry was created by using the Computed Tomography (CT). Boundary conditions of the model were estimated from the force equilibrium of the lower limb. All numerical models were processed in the commercial package ANSYS Workbench v15.0. It is shown that the hip screws of the PFN system result in lower equivalent stresses than the screws of the PFT system. Maximal strains of the bone tissue, when using the PFN system, are situated near the fracture, close the hip screw thread. For the PFT system, the maximal strains are only near the area of fracture.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231101 |
| Date | January 2015 |
| Creators | Hrdlička, Jan |
| Contributors | Valášek, Jiří, Florian, Zdeněk |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds