This master thesis deals with the development and construction of the inverted pendulum, inspired by the Cubli project. The objective is to develop and design an inverted pendulum, in the shape of one side of the cube balancing at one of its corner and for balancing is used the flywheel. For its design 3D printing is used to the maximum extent and as the electronic parts commonly available components at an affordable price are used. The design of the construction and the components allow the construction of a complete cube, without the need of further development or fundamental changes in the design of the model. For the calculations and the design of the controller the Matlab / Simulink software was used. As the controller algorithm the LQR algorithm is used with added integral feedback, to minimize control error. The 3D models of the single parts are created with FreeCAD software and printed on a 3D Prusa i3 MK2S printer.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:399423 |
| Date | January 2019 |
| Creators | Ježek, Michal |
| Contributors | Zuth, Daniel, Marada, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.004 seconds