The aim of my diploma thesis was to find the possibilities of reaching the dimensional tolerance in the individual phases of casting by the investment casting process. The accuracy of the selected wax patterns and castings were measured by a caliper. At first the selected dimensions of the wax models were measured right after taking them out of the mold and then they were measured during seven days. The castings were measured after pouring. The obtained figures were statistically evaluated. The results show that the large-scale and thick-wall wax model should be coated after seven days of stabilization because the dimensions of the wax model are not stable.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228154 |
| Date | January 2008 |
| Creators | Kučera, Tomáš |
| Contributors | Vašťák, Patrik, Horáček, Milan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds