The aim of this thesis is to verify a possibility of controlling the crystallisation of aluminium alloys poured in shell moulds in order to achieve directional solidification. For this purpose, new cooling plant has been designed and fabricated. Several sample castings were produced under different initial conditions. Based on the evaluation of measured temperatures, a numerical simulation of heat transfer was created using the ProCAST software. Finally, the sample castings were sectioned into specimens that were, subsequently, metallographically polished and the evaluation of their structure with respect to the amount and types of defects was performed.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228994 |
Date | January 2010 |
Creators | Mašková, Lenka |
Contributors | Střítecký, František, Roučka, Jaromír |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds