The aim of thesis is description of polymer optical fiber (POF). In particular, focusing on their application and its associated standardization. After explaining the principle of signal transmission by polymer fibers, glass fibers are compared with the polymer fibers. The attention is then paid to the types of POF and their connectors. Another part is engaged in standards of polymer fibers, according to their area of application. Following chapter describes the application of polymer fibers in practice, especially in the automotive industry and sensor technology. Standalone chapter is dedicated to deploying POF fibers in LANs. It mentions comparasion with copper and wireless networks, summarizes the advantages and disadvantages. Chapter also provides an overview of the components used in POF - optical converter, switch with optical interfaces, optical network card, etc. In the practical part is created the design of home network for two-storey family house. The proposal was implemented by CableProject CAD software, first using copper cabling (UTP category 5e) and then using polymer fibers. Finally, both proposals are compared with each other. It has been made detailed financial analysis, compared performance of instalation and methods of cable instalallation. The practical part is also dedicated to measuring the parameters of POF networks, the impact of the attenuation loss, explores methods of joining glass and polymer fibers and is engaged in IPTV transmission simulation in real conditions.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219433 |
| Date | January 2012 |
| Creators | Stiburek, Martin |
| Contributors | Tejkal, Vladimír, Šporik, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds