Return to search

Iterative Evaluation and Control Methods for Disturbance Suppression on a High Precision Motion Servo

Moore’s law states that the number of transistors in an Integrated Circuit (IC) doubles every two years. Ever-increasing performance in mask writing machinery is therefore required being the first step in the manufacturing process. Many factors affect the quality of the end product, with the motion control system playing an important role. This thesis analyzes the performance of the motion controller for the positioning system in a mask writer application. The target motion in the X-axis in the mask writer is by design highly repetitive and predictable. As of today a feedforward-feedback controller is used, tuned for low deviation during writing. In this thesis it is found that the motion control can be improved by exploiting the repetitive nature of the motion task. Two iterative methods are explored, Iterative Feedback Tuning (IFT) and Iterative Learning Control (ILC). IFT is implemented as a parameter optimizing method for the existing Proportional-Integral-Derivative (PID) controller. Given suboptimal initial parameters the algorithm converges to a global minimum using a cost function to minimize total deviation and constraints on the maximum deviation. With the optimized parameter settings an improvement of a 31 % decrease in total deviation is seen compared to the default setting. ILC is implemented as a replacement to the current controller in an exposure motion. With the use of saved data from previous iterations the control signal is updated and refined to better suit the target motion. ILC is a promising method within high precision motion control by virtue of not needing a model of the system and its ability to suppress reoccurring disturbances. The algorithm achieves an improvement of a 94% decrease in total deviation during writing compared to the current controller. However, with this implementation long term stability is not guaranteed. A stable implementation of the algorithm tested on a test rig achieves an improvement of a 79.8% decrease in deviation during writing compared to the current feedforward-feedback controller. Additionally, correlations between parameter values of the current feedback controller and servo characteristics are analyzed to aid in the manual tuning process. Tuning the PID controller for fast rise time decreases the total deviation during writing. The derivative gain in the controller should be high to decrease the overshoot caused by the aggressive controller. This will induce some oscillations into the system, however not at the cost of performance as a result of the smooth motion during writing.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-196356
Date January 2023
CreatorsThunberg, Claes, Kastensson, Klara
PublisherLinköpings universitet, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0023 seconds