This thesis presents an architecture and an FPGA implementation of the two dimensional discrete wavelet transformation (DWT) for applications where row-based raw image data is streamed in at high bandwidths and local buffering of the entire image is not feasible. The architecture is especially suited for multi-spectral imager systems, such as on board an imaging satellite, however can be used in any application where time to next image constraints require real-time processing of multiple images. The latency that is introduced as the images stream through the
iii
DWT module and the amount of locally stored image data, is a function of the image and tile size. For an n1 × / n2 size image processed using (n1/k1) × / (n2/k2) sized tiles the latency is equal to the time elapsed to accumulate a (1/k1) portion of one image. In addition, a (2/k1) portion of each image is buffered locally. The proposed hardware has been implemented on an FPGA and is part of a JPEG 2000 compression system designed as a payload for a low earth orbit (LEO) micro-satellite to be launched in September 2003. The architecture can achieve a throughput of up to 160Mbit/s. The latency introduced is 0.105 sec (6.25% of total transmission time) for tile sizes of 256× / 256. The local storage size required for the tiling operation is 2 MB. The internal storage requirement is 1536 pixels. Equivalent gate count for the design is 292,447.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/1056282/index.pdf |
Date | 01 August 2003 |
Creators | Benderli, Oguz |
Contributors | Tekmen, Yusuf Cagatay |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | M.S. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.1115 seconds