Return to search

Numerical Simulation of Corium Jet Fragmentation

Severe accident studies have become important for understanding the environmental impact of nuclear power following the Three Mile Island (TMI) accident. Severe accident phenomena are interdisciplinary since they can include the interaction of molten corium with reactor structures and water, and the transport and release of fission products that carry vapors and aerosols. During an accident, molten corium may fall in the form of a jet into a water pool. The fragmentation of the corium jet is a critical process concerning Fuel-Coolant Interactions (FCI). A steam explosion could occur depending on jet fragmentation and dispersion in the water. A 2-D in-house CFD MATLAB script has been developed by employing the Volume of Fluid Method (VOF) to simulate jet fragmentation in a water pool. This research is the first study to use the Multidimensional Universal Limiter for Explicit Solution (MULES) algorithm to capture the interface behavior in the jet breakup process. The effect of the compression constant, the mesh sensitivity, and the face correction loop on the MULES are investigated in this thesis. Moreover, the effects of the jet inlet velocity and jet diameter on the jet breakup length are numerically studied using the newly developed code. The simulation results compared well with the experimental results and another numerical study found in the literature. / Master of Science / After the TMI accident, many countries have started experimental and numerical studies to investigate and predict the accident's possible outcomes. During a severe accident, the molten corium may drop into a water pool in the form of a jet. The jet contacts the water, fragments into droplets and disperses in the pool, which could then cause a steam explosion. A possible molten corium-water interaction is simulated using a 2-D in-house CFD code written in MATLAB in this study. Interface tracking is one of the most critical processes in multi-phase flow simulation, and the MULES algorithm is used to capture the interface in this study. It is the first study to use the MULES algorithm to investigate jet breakup behavior. The simulation results compared well with experimental data and other numerical studies.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/110146
Date23 May 2022
CreatorsAkin, Yunus Eren
ContributorsMechanical Engineering, Liu, Yang, Pacheco Duarte, Juliana, Pierson, Mark Alan
PublisherVirginia Tech
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis
FormatETD, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/

Page generated in 0.0024 seconds