Titanium and aluminium alloys are among the most used construct materials due to their physical and mechanical properties except steels. The joining of these alloys can improve properties of whole construction but it is still difficult task. Especially welding of titanium and aluminium alloys is difficult cause formation of undesirable intermetalic phases in the weld. This thesis focuses on influences of electron beam welding parameters especially focusing and deflection of beam and preheating of base material to quality of heterogeneous join of titanium alloy Ti6Al4V and aluminium alloy EN AW-6061 – T651. There is described preparation of welded joins and brazed joins in the thesis, which are evaluated by light microscopy, scanning electron microscopy and EDS analysis of chemical composition. There was evaluated presence and chemical composition of formated intermetalic phases in the welded joins and quality and defects in the brazed joins.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318832 |
| Date | January 2017 |
| Creators | Král, Michael |
| Contributors | Jan, Vít, Foret, Rudolf |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds