Return to search

A method for on-line water current velocity estimation using Lol-cost autonomous underwater vehicles

Thesis: S.M., Joint Program in Oceanography/Applied Ocean Science and Engineering (Massachusetts Institute of Technology, Department of Mechanical Engineering; and the Woods Hole Oceanographic Institution), 2020 / Cataloged from student-submitted PDF of thesis. / Includes bibliographical references (page 85). / Advances in the miniaturization of microelectronics has greatly contributed to the proliferation of small, low cost autonomous underwater vehicles (AUVs). These affordable vehicles offer organizations a flexible platform that can be adapted to support a multitude of research goals. The small size and low entry cost come with a trade off of simple navigation systems, typically dead reckoning (DR) using a speed determined via propeller counts and heading from a low cost micro-electromechanical system (MEMS) inertial measurement unit (IMU), whose error grows unbounded without the availability of a ground referenced fix source and is compounded by the bias present in the speed measurement due to the change in hydrodynamics from the addition of sensors to the hull form. Additionally, some capabilities such as water current velocity measurement traditionally requires the addition of equipment that is not only expensive, but also whose size and power consumption can adversely affect operating characteristics and deployment times. This thesis expands on previous research using one-way travel time inverted USBL (OWTT-iUSBL) to calculate the local current velocity without the addition of a Doppler velocity log (DVL) or acoustic Doppler current profiler (ADCP). A novel extended Kalman filter (EKF) is proposed that, in addition to calculating the current velocity, estimates and corrects for the bias present in the speed measurement as determined by the main vehicle computer. Using data collected on the Charles River at the Massachusetts Institute of Technology (MIT) Sailing Pavilion, it is shown that current velocities can be reasonably calculated using OWTT-iUSBL data as compared to the values calculated using long baseline (LBL) data. / by Christopher R. Dolan. / S.M. / S.M. Joint Program in Oceanography/Applied Ocean Science and Engineering (Massachusetts Institute of Technology, Department of Mechanical Engineering; and the Woods Hole Oceanographic Institution)

Identiferoai:union.ndltd.org:MIT/oai:dspace.mit.edu:1721.1/129023
Date January 2020
CreatorsDolan, Christopher R.,Lieutenant Commander(Christopher Raymond)
ContributorsMichael Jakuba and Erin M. Fischell., Joint Program in Oceanography/Applied Ocean Science and Engineering., Massachusetts Institute of Technology. Department of Mechanical Engineering., Woods Hole Oceanographic Institution., Joint Program in Oceanography/Applied Ocean Science and Engineering, Massachusetts Institute of Technology. Department of Mechanical Engineering, Woods Hole Oceanographic Institution
PublisherMassachusetts Institute of Technology
Source SetsM.I.T. Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis
Format85 pages, application/pdf
RightsMIT theses may be protected by copyright. Please reuse MIT thesis content according to the MIT Libraries Permissions Policy, which is available through the URL provided., http://dspace.mit.edu/handle/1721.1/7582

Page generated in 0.0017 seconds