Return to search

Cyclic shear device for interfaces and joints with pore water pressure

An improved multi degree-of-freedom direct shear device has been designed and constructed to test interfaces and joints under pore water pressure. Any two structural (concrete, steel, wood) or geologic (soil, rock) materials may be tested in the device as long as the top specimen is solid. The apparatus is designed to hold a 7.5-inch diameter 3-inch thick upper sample and a 9-inch diameter 3-inch thick lower sample. A normal stress of 400 psi (2.7 MPa) and a shear stress of 550 psi (3.9 MPa) can be developed at the interface. Test loading may be static, quasi-static, or cyclic, and constant or variable stiffness loading is available. A stiff reaction frame was designed to house the device and is described. The electro-hydraulic system is capable of supporting cyclic testing at 30 Hz. A new computer-controlled data acquisition and control system is also described.

Identiferoai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/276922
Date January 1988
CreatorsRigby, Douglas Bertrand, 1956-
ContributorsDesai, Chandrakant S.
PublisherThe University of Arizona.
Source SetsUniversity of Arizona
Languageen_US
Detected LanguageEnglish
Typetext, Thesis-Reproduction (electronic)
RightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.

Page generated in 0.0019 seconds