The aim of this thesis was to design a robotic cell for spot welding of seat reinforcement and the subsequent automatic transport of the part from the cell. Both construction plan and process simulation in Process Simulate should be performed there. It is therefore an application for the automotive industry. The cell consists of a device into which the operator places the parts and is placed on the designed turntable. The welding is performed by two Kuka robots and welding tongs attached to them. The thesis deals with the design of the structure and the choice of individual components, as well as their appropriate deployment in the cell. Along with the design of the cell, the simulation was processed in the software. The output of the thesis is a 3D model of the workplace, simulation of the whole process of welding and manipulation and evaluation of the cell cycle using the RCS module.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400978 |
| Date | January 2019 |
| Creators | Kaňa, Vojtěch |
| Contributors | Kubela, Tomáš, Pochylý, Aleš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds