<p>A 64-modulus prescaler operating at 5.8 GHz has been designed in a 0.18 μm CMOS process. The prescaler uses a four-phase high-speed ÷4 circuit at the input, composed of two identical cascaded ÷2 circuits implemented in pseudo-NMOS. The high-speed divider is followed by a two-bits phase switching stage, which together with the input divider forms a ÷4/5/6/7 circuit. The phase switching stage is mostly implemented in complementary CMOS. After this follows four identical ÷2/3 cells with local feedback, also implemented in complementary CMOS. Other architectural approaches are also described and tried out. An architecture based solely the ÷2/3 cells with local feedback is presented. The ÷2/3 cells were implemented and simulated, and worked up to 2.3 GHz. An alternative high-speed divider based on an inverter ring interrupted by transmission gates is also described. Simulations showed that a divider using pseudo-NMOS inverters and CMOS transmission gates operated well and gave out four signals evenly spaced in phase at a input frequency of 4.8 GHz.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:ntnu-9324 |
| Date | January 2006 |
| Creators | Myklebust, Vidar |
| Publisher | Norwegian University of Science and Technology, Department of Electronics and Telecommunications, Institutt for elektronikk og telekommunikasjon |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0022 seconds