Return to search

An investigation of the effects of the addition of powdered activated carbon to the activated sludge of cellulose acetate manufacturing wastewater

Equilibrium powdered activated carbon (PAC) concentrations of 20, 160, and 280 mg/L in activated sludge reactors treating cellulose acetate manufacturing wastewater were found to enhance substrate removal. The improved substrate removal as measured by COD averaged 20 percent. The apparent mechanism of improved removal was the stimulation of greater biomass growth.

PAC addition increased the oxygen uptake rate (OUR), the observed cell yield coefficient (Ybbs) and the first order substrate removal coefficient (Kb) of the activated sludge system, which were operated at a temperature of 18°C and a biological solids retention times of fourteen days. The addition of PAC also improved the sludge settleability but this resulted in higher effluent suspended solids concentration because zone settling Velocity was the primary factor affecting effluent suspended solids.

A type of activated sludge bulking, known as jelly formation, plagued the biological reactors but nitrogen addition appeared to solve the problem / Master of Science / incomplete_metadata

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/50039
Date January 1985
CreatorsKwelle, Chidiadi Hart
ContributorsSanitary Engineering, Randall, Clifford W., Hoehn, Robert C., Novak, John T.
PublisherVirginia Polytechnic Institute and State University
Source SetsVirginia Tech Theses and Dissertation
Detected LanguageEnglish
TypeThesis, Text
Formatx, 234 leaves, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 12763299

Page generated in 0.1183 seconds