Return to search

A comparison of antichlors used in scrubbing chlorine and chlorine dioxide from bleach plant vent gases

A project was conducted to determine the relative effectiveness of several antichlors in regards to their Cl₂ and ClO₂ gaseous "scrubbing" capacity. Both a pilot study as well as full scale trials were completed. Work was done on a bleach plant-packed tower scrubber system at a kraft pulp and paper mill. The pilot study was performed at pH's of 10.0 to 12.0 and therefore may have masked the scrubbing potential of two, lower pH, antichlors. Results from the full-scale trials showed that 45% Sodium Hydrosulfide (NaHS) solution, was the most efficient when compared to 42% Sodium Bisulfite (NaHSO₃) solution and CoProduct solution. A cost analysis was completed and revealed that CoProduct solution was the most cost effective of the three compounds. Other non-economic factors such as scrubber plugging tendencies, the potential for toxic gas formation, and handling difficulties should be examined before a final choice of antichlors is made. / M.S.

Identiferoai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/106193
Date January 1989
CreatorsParrish, Charles R.
ContributorsEnvironmental Engineering
PublisherVirginia Polytechnic Institute and State University
Source SetsVirginia Tech Theses and Dissertation
LanguageEnglish
Detected LanguageEnglish
TypeThesis, Text
Formatx, 94 leaves, application/pdf, application/pdf
RightsIn Copyright, http://rightsstatements.org/vocab/InC/1.0/
RelationOCLC# 19646906

Page generated in 0.0018 seconds