Aluminium Al-Mg-Si alloys are the most commonly used in automotive and construction industry. Hexagonal ’-phase is one of the metastable phases occured in this type of alloys. Unlike classic square -phase, this ’-phase is characterized by different crystalographic orientation to the matrix and shape. Standard method used for identification of aluminium alloys is scanning electron microscopy (SEM), because of its quickness and efficiency, but in case of very thin or damaged structures (as a result of metallographic process) it’s insufficient. Scanning low energy electron microscopy (SLEEM) can be appropriate for identification of mentioned precipitates due to its physical principles resulting in many advantages compared to SEM. So the most important benefits are interaction volume reduction (which leads to improvement of surface sensitivity), increase of material contrast (ability to change matrix / precipitates contrast) as well as crystalographic contrast.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231721 |
| Date | January 2014 |
| Creators | Ligas, Aleš |
| Contributors | Julišová, Martina, Mikmeková, Šárka |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0882 seconds