The project looks for a solution to optimalization of rotational deep drawn part with flange production. It deals with sewerage drain, which is produced by conventional tool to two deep drawing operations. The used material is austenitic Cr-Ni stainless steel 1.4301. Suitability of this material for deep drawing operations was considered by means of the tensile test and the Erichsen test. On the bases of these results, serializability of production and theoretic relationships for determination of number of deep drawing operations, it was decided upon one operation serial production, by conventional tool without attenuation thickness of sheet. Production will take place on hydraulic press Dieffenbacher PO250 with magnetic tool fastening. The deep drawing tool was designed and constructed. For series of 2 000 units per year the rate of return was calculated after 4,7 years, while using the punch from the current second deep drawing operation it was calculated after 3,4 years.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230095 |
Date | January 2012 |
Creators | Staněk, Vojtěch |
Contributors | Chudík, Ivan, Podaný, Kamil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0022 seconds