<p>Predstavljena je nova metoda intenzivne plastične deformacije – višefazno sabijanje V-alatom. Koristeći ovu metodu, sabijanjem u osamnaest faza, unapređene su mehaničke osobine niskougljeničnog čelika Č.1221 – tvrdoća, čvrstoća i deformabilnost. Za ispitivanje mikrostrukture korišćeni su svetlosni, skening i transmisioni mikroskop. Prosečna veličina kristalnog zrna početnog materijala od 19 mikrometara je smanjena na 250 nanometara nakon dvanaest faza sabijanja. Nakon osamnaest faza sabijanja na čelu uzorka ostvarena je ukupna deformacija u iznosu od 3,38.</p> / <p>A new severe plastic deformation method has been presented - multistage upsetting by V-shape dies. By using this method, in eighteen upsetting stages, mechanical propreties (hardness, strenght and formability) of C15E low carbon steel has been improved. For microstructure analysis light, scanning and transmission microscopes have been employed. Initial average grain size of 19 μm has been reduced to 250 nm after twelve upsetting stages. After eighteen upsetting stages, total effective deformation at the sample forehead of 3,38 has been obtained.</p>
Identifer | oai:union.ndltd.org:uns.ac.rs/oai:CRISUNS:(BISIS)95538 |
Date | 06 November 2015 |
Creators | Vilotić Marko |
Contributors | Kakaš Damir, Stefanović Milentije, Aleksandrović Srbislav, Šiđanin Leposava, Plančak Miroslav, Škorić Branko |
Publisher | Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, University of Novi Sad, Faculty of Technical Sciences at Novi Sad |
Source Sets | University of Novi Sad |
Language | Serbian |
Detected Language | Unknown |
Type | PhD thesis |
Page generated in 0.0174 seconds