High-strength steel (HSS) conforming to ASTM A1035 is becoming increasingly used in various structural applications, including in high-rise buildings and bridges. Due to their chemistry and manufacturing process, ASTM A1035 steel bars result in a combination of high tensile strength to yield ratio and varying levels of corrosion resistance. One potential application of ASTM A1035 bars is in the blast-resistant design of concrete structures, where their use can allow for reduced steel congestion, and increased blast resistance. Despite their high initial cost, stainless steel (SS) reinforcing bars are also seeing increased use in concrete construction. Solid stainless steel bars are referenced in ASTM A955, which is applicable to various stainless steel alloys. In addition to their inherent corrosion resistance, most stainless steel bars possess greater tensile strength, and importantly, exceptional ductility, when compared to ordinary steel reinforcement. This unique combination of strength and ductility makes SS bars well-suited for blast design applications.
The overarching aim of this thesis is to gain better understanding of the blast behavior of RC flexural members designed with high-strength (HSS) and stainless steel (SS) reinforcement. This objective is achieved through a combined experimental and numerical research program. As part of the experimental research, a large set of beams, subdivided into three series, are tested under either quasi-static bending or simulated blast loads using the University of Ottawa shock-tube. Series 1 (HSC-HSS) and Series 2 (HSC-SS) aim at examining the effects of blast detailing (as recommended in modern blast codes,) on the quasi-static, blast and post-blast behaviour of high-strength concrete (HSC) beams reinforced with either ASTM A1035 high-strength bars (8 beams) or ASTM A955 stainless steel bars (16 beams). In addition to the influence of detailing, the effects of steel grade/type, steel ratio and steel fibers are also studied. Series 3 further studies the benefits of combining higher grade or higher ductility reinforcement, with more advanced ultra-high performance concrete (UHPC). This series includes 20 UHPC beams built with either ordinary, HSS or SS reinforcing bars (UHPC-NSS, UHPC-HSS and UHPC-SS). In addition to the effect of steel grade/type, concrete type, steel ratio and steel detailing are also studied.
The results from Series 1 and 2 demonstrate the benefits of implementing high-strength and stainless steel reinforcement in HSC beams subjected to blast loads, where their use leads to increased blast capacity, reduced support rotations, and higher damage tolerance. The results further demonstrate the benefits of “blast detailing” on the ductility and resilience of such beams, under both static and blast loads. The results also show that the use of steel fibers can be used to relax blast detailing in the beams with high-strength or stainless steel by increasing the required tie spacing from d/4 to d/2. The results from Series 3 confirm that the use of UHPC in beams enhances flexural response (in terms of strength and stiffness), which in turn results in superior blast resistance. Conversely, the high bond capacity of UHPC makes such beams more vulnerable to bar fracture. Increasing the steel ratio is found to effectively increase the failure displacement and ductility of the UHPC beams. The use of high-strength steel is found to increase load capacity and blast resistance, while the use of stainless steel results in remarkable ductility, which further enhances beam response under blast loading.
As part of the numerical research program, the static and blast responses of the test beams are simulated using either 2D or 3D finite element (FE) modelling, using software VecTor2 and LS-DYNA. The numerical results show that the 2D FE modelling using software VecTor2 can provide reliable predictions of the static and blast responses of the HSS or SS reinforced HSC beams built with varying detailing, in terms of load-deflection response, cracking patterns, failure mode, displacement time histories and dynamic reactions. Likewise, the 3D FE modelling using software LS-DYNA with appropriate modelling of UHPC (using the Winfrith Concrete or CSCM models) can well predict the blast responses of UHPC beams with ordinary, high-strength and stainless steel, in terms of displacement/load-time histories, damage and failure modes.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/44136 |
| Date | 06 October 2022 |
| Creators | Li, Yang |
| Contributors | Aoude, Hassan |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | Attribution-NonCommercial-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-nc-sa/4.0/ |
Page generated in 0.0025 seconds