Return to search

Technologie výroby plastového nástavce se závitem / Production technology of plastic threaded adapters

The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:230419
Date January 2012
CreatorsTurek, Tomáš
ContributorsKebrle, Ondřej, Kandus, Bohumil
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds