This master's thesis is engaged in development of new sanding units for a specific type of rail vehicle. Sanding in rail transport is application of most commonly silica sand into wheel-rail contact. Thanks to its reliability it is still the most widely used method for removing contaminants and improving adhesion in that contact. Sanding devices were developed in cooperation with corporation, which deals with production of rail transport equipment, among other things. The most important part of sanding device is sand dispenser. Dispensers were experimentally developed at the test station in the cooperating corporation. Dispensers were tested for utilization conditions on the locomotive of the train and conditions for trams and light rail vehicles. Furthermore, sand boxes have been designed for specific type of rail vehicle and new type of sand discharge tube, which directs sand directly into wheel-rail contact was designed too.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:232037 |
Date | January 2015 |
Creators | Matečka, Martin |
Contributors | Růžička, Bronislav, Omasta, Milan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds