The paper evaluates technological, economic and construction aspects of the component production and the design of the tool serving for large-scale production of the S355MC steel rack component. Use of a progressive tool combining cutting and bending operations in four steps has been decided as the most appropriate according to literature study. Based on the need of production of two plane-symmetrical pieces at a time, the tool will produce both pieces simultaneously, which is economically advantageous. The tool is designed for use on the Arisa 630t mechanical press. Material will be winded off the roll, flattened and pushed into the tool by a precision feeder. The total cost of production of the component was set at 18.80 CZK.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:379021 |
| Date | January 2018 |
| Creators | Repatý, Michal |
| Contributors | Podaný, Kamil, Žák, Ladislav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds