The diplom thesis deals with modernization of older drill out machine MTS3000 for measurement of residual stress. To make the device work it is necessary to keep running computer control card and necessary software. Because a producer does not provide any upgrade, it was decided to put the device into operation by creating new software. At first an analysis of drilling method and function of device MTS3000 - Restan was made. Next step was to disassemble and analyze the station of the drilling device. Then the station was put into operation and modified for control via USB device NI USB 6009. Finally a computer program in LabVIEW environment was created to automate the measurement process. Program has two main tasks: one is to control the drilling cycle of the machine. Another one is to acquire data from measuring amplifier station.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:444974 |
| Date | January 2021 |
| Creators | Švehla, Lukáš |
| Contributors | Houfek, Lubomír, Krejčí, Petr |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds